How to Repair Hot Tub Scratches and Cracks?

---

Due to regular use, your hot tub will sustain cracks and scratches. If not repaired right away, such damages will become bigger and more prominent. This will affect the look of your tub, not to mention that it will cause further issues on your tub in the long run. Knowing how to repair a hot tub when minor problems occur makes a big difference, regardless if you have a new or used tub.

If you notice shallow scratches and crack stains on your tub, you can do the following as a solution:

Materials you need

• Rotary bit
• Drill
• Acrylic repair kit
• Sandpaper
• Towel
• Hot tub cleaner
• Procedure on repairing hot tub

​
​Once you have these supplies, you can now move on to the steps. Here’s what you can do:

​Step 1. Prepare the area

Before you do anything, make sure that the hot tub is thoroughly drained, dry, and unplugged. You can use a towel to remove the remaining moisture. You can also take this opportunity to clean your hot tub thoroughly.
​
Next, get the acrylic repair kit and follow the instructions on the packaging. Small scratches will not consume the entire kit. If there are large cracks, you have to drill it first until you create a ‘V-shape’ slope. After that, fill it with the acrylic solution.

​Step 2. Let it dry

Once you have applied the patch, let it dry thoroughly. Some kits need to be dried overnight or for a few days for the hot tub crack repair to be effective.
​
After the patch material has dried, it’s time to sand the rough bumps and edges. This will make the repair look natural without the abrasive surface. You can also use a buffer for a shiny finish so the repairs will not look obvious.

Step 3. Clean up

​Once done, clean up the area and make sure that no dust remains. If there are still cracks on your tub, just repeat the hot tub blister repair process until everything is smooth. For scratches, there’s no need to drill. Just clean the area first and then apply the patch material.

Step 4. Fill the tub with water

After the repairs, fill the hot tub so you can check for leaks. After that, drain the tub and check the repairs you’ve done. Make sure that the patch material is fully dried, or it will only melt in hot water once you fill the tub.

If you are not a handyman, you can call for a hot tub repair service instead. They have the right materials and skills to fix just about any hot tub problem. A hot tub repair service will repair it for you, from shallow scratches, cracks, and leaks.

Here at Calgary Hot Tub Repair & Service, we provide a full range of hot tub repair solutions. Regardless of your hot tub size, technology, and make, we can fix it for you. Call us and we will give you an instant, zero-obligation free quote.